|
|
 Posted - June 06 2016 : 4:30:12 PM
|
|
T have 2 tyco gp20's I would like to use the shell for a Dcc project , is there a chassis that will fit this shell ???? or come close I'm willing to modify !!! any help appreciated!!!
|
Country:  USA ~
Posts: 2 ~
Member Since: June 26 2015 ~
Last Visit: June 29 2017
|
Alert Moderator
|
|
|
|
Posted - June 06 2016 : 9:02:55 PM
|
I've heard some Athearn chassis's will fit. I have one that almost fits, but the semi-low nose Athearn holds the Tyco shell up about 1/8 inch. So some weight removal in the front and rear areas will be necessary to make this chassis work under a Tyco shell, because the Tyco low nose shell is probably a bit TOO low. Not sure. But it's close enough it can be made to fit with some metal removal.
Jerry
" When life throws you bananas...it's easy to slip up"
|
|
Country: USA ~
Posts: 3974 ~
Member Since: January 04 2009 ~
Last Visit: January 11 2019
|
Alert Moderator
|
|
|
|
Posted - June 07 2016 : 02:14:39 AM
|
Think I used the athearn gp-35 chassis on mine.
Modeling on the cheap
|
|
Country: USA ~
Posts: 137 ~
Member Since: December 08 2015 ~
Last Visit: June 26 2017
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
