|
Posted - January 05 2015 : 10:31:38 PM
|
I'm looking to use Cal Scale Handrail Balls on my steam engines. What size wire is suggested for these? Looking to use brass wire.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
Posted - January 13 2015 : 3:07:55 PM
|
Justin,
Thanks for posting this. Was wondering where one might find something like these. Did some Google searching and found a post you did about 2 years ago w/the same question. I'm guessing you just dug these up again recently? Here's what they had to say about the size of wire. http://www.tycoforums.com/tyco/forum/topic.asp?TOPIC_ID=14100 Going to pick some of these up in a little and see what wire I have will work. No clue if I have some .015 wire... If you find something that works, please share.
Thanks,
Tim
|
Country: USA ~
Posts: 259 ~
Member Since: October 23 2014 ~
Last Visit: March 28 2017
|
Alert Moderator
|
|