|
Posted - December 11 2010 : 05:56:49 AM
|
i have just obtained a general kit,which i am stripping down,and would ask the question,did they make a wood load for it ken
|
Country: United Kingdom ~
Posts: 8294 ~
Member Since: September 28 2006 ~
Last Visit: October 20 2021
|
Alert Moderator
|
|
|
Posted - December 11 2010 : 07:54:26 AM
|
Hi Ken. There is a wood load cover for the General part number 7722. It has a pin on the bottom that goes in the hole on the top of the tender.. Here is picture of one that is on one the generals I have.. Carl
Here is the parts list that shows the cover also...
Numquam Immoderatio Satis Est (Too Much Is Never Enough )
Edited by - VintageHO on December 11 2010 08:09:18 AM
|
Country: USA ~
Posts: 632 ~
Member Since: January 23 2006 ~
Last Visit: June 21 2020
|
Alert Moderator
|
|
|
Posted - December 11 2010 : 3:08:30 PM
|
cheers carl,on the instructions i have the wood load is not shown,will keep eyes open for one ken
|
Country: United Kingdom ~
Posts: 8294 ~
Member Since: September 28 2006 ~
Last Visit: October 20 2021
|
Alert Moderator
|
|
|
Posted - December 11 2010 : 3:35:04 PM
|
never mind locating a plastic wood load Make a platform the size of tender & get some sticks & make a REAL wood load
|
Country: USA ~
Posts: 14690 ~
Member Since: February 23 2009 ~
Last Visit: May 03 2024
|
Alert Moderator
|
|
|
Posted - December 17 2010 : 3:11:05 PM
|
I also am missing 4. I thought only 2, but was wrong.
toptrain
" It's a Heck of a Day " !!!
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
Posted - December 18 2010 : 12:46:13 AM
|
I think there might be one on Ebay under Mantua Locomotive, Steam or Loco. I remember seeing something like that being offered.
|
Country: USA ~
Posts: 650 ~
Member Since: April 28 2010 ~
Last Visit: March 28 2024
|
Alert Moderator
|
|