|
|
 Posted - October 31 2010 : 11:43:55 PM
|
I just read an old post (2008) concerning the Mantua Logger and how the factory tubing was done away with that connects the front and rear gear boxes. The person that posted the information unfortunately only mentioned that he used a NWSL coupling set but did not say which one he used. What I need is to know which one he used. If someone on this list could give me that info, I would be very grateful. NWSL makes a ton of these coupling sets so it would be a big time saver to know what one to use. I have tried several different types of couplings on this engine but nothing has worked well for me. Thanks for any info you can provide.
Richard in Vermont
|
Country:  USA ~
Posts: 42 ~
Member Since: October 31 2010 ~
Last Visit: February 05 2019
|
Alert Moderator
|
|
|
|
Posted - December 15 2010 : 8:01:08 PM
|
Richard, that was me that did the NWSL set up. I will look up the part numbers and post them in the next few days. I have been away from the forum for awhile. Mike
Still NT's, I have Aspergers.
|
|
Country: USA ~
Posts: 308 ~
Member Since: November 17 2008 ~
Last Visit: June 05 2023
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
