|
|
 Posted - January 04 2009 : 4:03:19 PM
|
Hey, since I've read thru some of the forums,and know some of you guys are nuts on the lil Hustler - where do you buy the tension springs for the brushes? Looks like the brushes are standard slugs, but the peg-mounted springs on the Hustler chassis aren't like anything else I've seen. They're thicker diameter, and I've found no reference to them on any Athearn parts sites. I need to replace a few that are missing, I lost a brush slug taking one apart, one had the spring unwound for some reason, maybe to loosen tension? Anyway, any parts leads for the Hustler would be appreciated .
Jerry
" When life throws you bananas...it's easy to slip up"
|
Country:  USA ~
Posts: 3974 ~
Member Since: January 04 2009 ~
Last Visit: January 11 2019
|
Alert Moderator
|
|
|
|
Posted - January 04 2009 : 4:48:56 PM
|
hi AMC_Gremlin_GT try this guy ken
http://www.hoseeker.net/choochoo/athearntrainparts.htm
84014 MOTOR BRUSH SPRINGS
29907 HUSTLER IDLER PULLEY BRKT 6
29911 HUSTLER SNOW PLOW 3
29912 HUSTLER MOTOR SHAFT PULLEY 4
29913 HUSTLER UNDERFRAME LEFT 1
29914 HUSTLER UNDERFRAME RIGHT 1
29917 HUSTLER COUPLER COVER 4
Edited by - catfordken on January 04 2009 4:56:02 PM
|
Country:  United Kingdom ~
Posts: 8294 ~
Member Since: September 28 2006 ~
Last Visit: October 20 2021
|
Alert Moderator
|
|
|
|
Posted - January 04 2009 : 7:09:07 PM
|
> hi AMC_Gremlin_GT try this guy ken
http://www.hoseeker.net/choochoo/athearntrainparts.htm <
Thanks, I'll do that.
Gremlin Guy
" When life throws you bananas...it's easy to slip up"
|
|
Country: USA ~
Posts: 3974 ~
Member Since: January 04 2009 ~
Last Visit: January 11 2019
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
