|
|
 Posted - January 30 2007 : 12:52:23 PM
|
|
Does anyone have an extra access panel for a PT motor..The motor is in a SD-24 Diesel engine, 1981...I broke off the little plastic band that retains the brush pickup spade/contact...Or perhaps where to try and locate one...Motor ran fine...I was cleaning it...Thanks...IAMFISH.
|
Country:  USA ~
Posts: 33 ~
Member Since: January 28 2007 ~
Last Visit: July 21 2012
|
Alert Moderator
|
|
|
|
Posted - January 30 2007 : 4:06:22 PM
|
If there's any of the plastic strap left you could gently heat it with a soldering iron so that it holds the plate/contact. I discovered this by accident. [:D]
Alco Fan
|
|
Country: USA ~
Posts: 2496 ~
Member Since: August 03 2006 ~
Last Visit: September 17 2024
|
Alert Moderator
|
|
|
|
Posted - January 30 2007 : 6:36:00 PM
|
| Nope, sheared off clean as a whistle...SO I'M STILL LOOKING....I did get it running by using a zip tie and backing the contact and it flies now...IAMFISH.
|
|
Country: USA ~
Posts: 33 ~
Member Since: January 28 2007 ~
Last Visit: July 21 2012
|
Alert Moderator
|
|
|
|
Posted - January 31 2007 : 5:09:01 PM
|
| I may have one lying around somewhere... I've gutted a few PTs to make dummies, but don't recall if I kept that plate (or where it is). I will try to look for you.
|
|
Country: USA ~
Posts: 2175 ~
Member Since: July 15 2006 ~
Last Visit: January 31 2010
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
