|
|
 Posted - July 21 2022 : 10:13:42 PM
|
What is this?
Thursday, July 21, 2022
I recently purchased a Tyco Blue and Gray Centennial set and this was included. It looks like a horn mounted on a rubber donut and don't believe it belongs in this set. Any clue what this is?   
Andy Carmona
|
Country:  USA ~
Posts: 49 ~
Member Since: November 24 2021 ~
Last Visit: May 08 2023
|
Alert Moderator
|
|
|
|
Posted - July 22 2022 : 3:58:26 PM
|
You don't give dimensions, but it appears to be an 0 Lionel 3-rail F unit roof mounted horn.
They were just like that, turned horn, inserted into a blackened "L" shaped frame, peened over at the rear of the horn, with two tabs hanging down (like yours) bent over to retain in place.
Almost looks like a hogged out old toy rubber tire it's stuck in.
Length of horn?
|
Country:  United Kingdom ~
Posts: 350 ~
Member Since: April 26 2013 ~
Last Visit: May 18 2024
|
Alert Moderator
|
|
|
|
Posted - July 22 2022 : 5:08:00 PM
|
Thanks for the reply and the information. Here are the dimensions.
 
Andy Carmona
|
|
Country: USA ~
Posts: 49 ~
Member Since: November 24 2021 ~
Last Visit: May 08 2023
|
Alert Moderator
|
|
|
|
Posted - July 22 2022 : 5:48:10 PM
|
Thanks for the info and the reply! The width of the donut is approximately 7/8 of an inch and the horn itself is half an inch long.
Andy Carmona
|
|
Country: USA ~
Posts: 49 ~
Member Since: November 24 2021 ~
Last Visit: May 08 2023
|
Alert Moderator
|
|
|
|
Posted - July 22 2022 : 6:50:21 PM
|
| Size looks like my Lionel 2343 horns. Save it!
|
|
Country: United Kingdom ~
Posts: 350 ~
Member Since: April 26 2013 ~
Last Visit: May 18 2024
|
Alert Moderator
|
|
|
|
Posted - August 07 2022 : 11:46:45 AM
|
Have no use for its ScaleCraft, I only collect Tyco, if you need it let me know
Andy Carmona
|
|
Country: USA ~
Posts: 49 ~
Member Since: November 24 2021 ~
Last Visit: May 08 2023
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
Event: What is this?
