|
Posted - April 23 2011 : 3:52:14 PM
|
I am looking for a 4-4-0 or 4-4-2 any make any conduction. I am trying to build a F1a Jubilee. I got the specs last night and it could be done but the easiest way is to start with either of the above mention. I will trade for one or buy it. let me know if you have one. Thanks. Ken
FIDDLEHEAD RAILWAY CO.
Edited by - Ken on April 23 2011 3:53:12 PM
|
Country: Canada ~
Posts: 468 ~
Member Since: January 17 2010 ~
Last Visit: February 29 2012
|
Alert Moderator
|
|
|
Posted - April 23 2011 : 6:23:24 PM
|
Ken ; The jubilee is no small engine. The locos you are mention are too small. You do better making a pacific smaller. Do you have the specks for this loco. Hight, length, driver size. frank
toptrain
" It's a Heck of a Day " !!!
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
Posted - April 23 2011 : 6:51:44 PM
|
Hi Frank, Your right that would be easier. I put this out to see if anyone would reply with some suggestions. I was surprised to learn that the boiler you see is only a cap with braces underneath to hold it in place. Thats why you do not see anything on top except the stack and the bell. I will now try to get a pacific to build one from. If anyone has one I would trade or buy it. contact me. Thanks for your time.
Ken
FIDDLEHEAD RAILWAY CO.
|
Country: Canada ~
Posts: 468 ~
Member Since: January 17 2010 ~
Last Visit: February 29 2012
|
Alert Moderator
|
|