|
|
 Posted - September 20 2008 : 1:46:53 PM
|
Hey Guys:
Anyone think it's a good idea to have an on-forum repository of Tyco Operating Accecories directions via scanning?
Interested to know. I have a few I'd scan in and others can add them till we have a full Tyco specific set!
-Gareth
|
Country:  Canada ~
Posts: 4200 ~
Member Since: January 08 2006 ~
Last Visit: November 09 2021
|
Alert Moderator
|
|
|
|
 Posted - September 20 2008 : 7:45:11 PM
|
I've got a couple...
|
|
|
|
|
 Posted - September 20 2008 : 9:03:22 PM
|
| G-i have quit a few operating accessories instructions and the means to scan as you know
|
Country:  USA ~
Posts: 2507 ~
Member Since: January 31 2006 ~
Last Visit: October 21 2017
|
Alert Moderator
|
|
|
|
Posted - September 20 2008 : 9:20:07 PM
|
I know of a website for model cars that has instructions and boxart uploaded.
I would also scan and upload tyco and other train instructions.
Mike
|
|
Country: Canada ~
Posts: 1586 ~
Member Since: December 07 2007 ~
Last Visit: March 03 2026
|
Alert Moderator
|
|
|
|
Posted - September 21 2008 : 4:43:05 PM
|
Hey Guys:
I can create a sticky or possibly a section in the Tyco section...
As GIC pointed out in a posting a while back, since the drive trains of the Tyco locomotives are so similar there's not much point in posting them. The accessories are a different matter as they are somewhat detailed and specific....
I'm in the process of unpacking in a new home and don't know where my accesories are but thats no reason not to get started!
Brian why don't you start and post yours and then the rest can fill in the blanks!?
Just instruction sets for accessories though to start with and we can see what we got...
-Gareth
Edited by - romcat on September 21 2008 4:44:06 PM
|
|
Country: Canada ~
Posts: 4200 ~
Member Since: January 08 2006 ~
Last Visit: November 09 2021
|
Alert Moderator
|
|
|
|
Posted - September 21 2008 : 10:00:18 PM
|
With the exception of the track crossings, I have nearly all of the accessories, boxed... missing just one of the "major" kits but that one is duplicate tooling anyway.
I may have a move coming up shortly. Whatever doesn't get posted here by then, I will try to fill in later on.
|
|
Country: USA ~
Posts: 2175 ~
Member Since: July 15 2006 ~
Last Visit: January 31 2010
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
