|
|
 Posted - July 15 2023 : 9:40:35 PM
|
|
I went to a local shop to buy some Testor's paint to finish a few older projects a couple of weeks ago. Testor's no longer makes/sells Model Maker paints. All of that old stock has disappeared from the dealer shelves. The shop owner said it was because of some environmental issues at the plant that would not allow the further production of MM paints. The little Testor's bottles sell for $3.29 @ now. The loss of the MM line with all of its color variations, make it almost impossible to continue to custom paint model trains. Painting multiple engines/cars the same color are just too expensive now due to the small quantity of paint using the small bottles....
|
Country:  USA ~
Posts: 650 ~
Member Since: April 28 2010 ~
Last Visit: March 28 2024
|
Alert Moderator
|
|
|
|
Posted - July 16 2023 : 08:36:12 AM
|
quote:The little Testor's bottles sell for $3.29 @ now.
Originally posted by AF Kid - July 15 2023 : 9:40:35 PM
|
During the 1970s, there was high inflation. The Nixon administration tried a wage and price freeze, which decreed that prices just wouldn't change. As a sidebar, this policy was the same failure in modern times as it was for the Roman emperor Diocletian over 15 centuries earlier. Anyway, Testors raised the price of those little bottles of paint from 15 to 19 cents and a teenaged kid sued them for raising the price during the price freeze. I never heard the outcome of the lawsuit, but imagine if you told that kid that someday his 15 cent jar of paint would be $3.29.
A while ago, I got some of the little jars of Testers enamel paint at Hobby Lobby. I forgot the price, but I'm pretty sure it was significantly less than $3.29.
Carpe Manana!
Edited by - scsshaggy on July 16 2023 08:38:26 AM
|
|
Country: USA ~
Posts: 2353 ~
Member Since: September 17 2013 ~
Last Visit: April 28 2024
|
Alert Moderator
|
|
|
|
Posted - July 16 2023 : 10:16:18 AM
|
| Custom painting is not dead. But you may need to rethink the way you paint. Most of my custom paint work was done with spray paint cans rather than an airbrush and model paints. Sherwin Williams makes automotive paint in spray cans, and they have the ability to custom create any colour you want from a paint chip. It is expensive, but far cheaper than buying the equivalent amount of model paint ever was.
|
|
Country: USA ~
Posts: 483 ~
Member Since: December 22 2013 ~
Last Visit: April 27 2024
|
Alert Moderator
|
|
|
|
Posted - July 16 2023 : 9:38:11 PM
|
quote:Custom painting is not dead. But you may need to rethink the way you paint. Most of my custom paint work was done with spray paint cans rather than an airbrush and model paints. Sherwin Williams makes automotive paint in spray cans, and they have the ability to custom create any colour you want from a paint chip. It is expensive, but far cheaper than buying the equivalent amount of model paint ever was.
Originally posted by jward - July 16 2023 : 10:16:18 AM
|
Having done quite a bit of custom painting on HO trains, using an Airbrush is the only way to go. Spray cans cannot get the small areas or small touch up spots. One can control the spray from light to heavy with precision using the airbrush. The same goes, when I spray on the finish clear coat...
Automotive paint is mostly Laquer based not Enamel as Testor's is. Some plastic does not do will with laquer....
Edited by - AF Kid on July 16 2023 9:41:15 PM
|
|
Country: USA ~
Posts: 650 ~
Member Since: April 28 2010 ~
Last Visit: March 28 2024
|
Alert Moderator
|
|
|
Bamos
Big Six
Status:
offline
| |
Posted - July 17 2023 : 4:53:57 PM
|
There are more manufacturers of paint now that there ever was. Just pick another brand there is always something close to anything offered by Modelmaster . I've used Vallejo and is very good paint but only use their thinner otherwise you will get a sticky mess.
Bill
|
|
Country: USA ~
Posts: 202 ~
Member Since: December 24 2017 ~
Last Visit: April 26 2024
|
Alert Moderator
|
|
|
|
Posted - July 22 2023 : 11:02:36 PM
|
Are we sure that they're done with this, I get that they discontinued Model Master about 3 years ago. So are you talking about that or their regular paints?
But on the flip side, there are plenty of other alternatives, numerous other paint brands (ex. Tamiya, Tru-Color, Badger, Vallejo, etc.)
|
|
Country: USA ~
Posts: 22 ~
Member Since: October 31 2022 ~
Last Visit: March 19 2024
|
Alert Moderator
|
|
|
|
Posted - July 23 2023 : 12:56:12 AM
|
Yet another reason to go with Penn Central. Many times, one can simply strip the overcoat paint
off and end up with a perfectly black shell. I save thousands using this method. 
Edited by - Chops124 on July 23 2023 12:56:31 AM
|
|
Country: USA ~
Posts: 11194 ~
Member Since: December 09 2013 ~
Last Visit: April 27 2024
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
