|
|
 Posted - March 25 2022 : 02:19:40 AM
|
Runs pretty good, but doubt it has seen a drop since it was manufactured.
|
Country:  USA ~
Posts: 11501 ~
Member Since: December 09 2013 ~
Last Visit: April 04 2025
|
Alert Moderator
|
|
|
|
Posted - March 25 2022 : 5:55:25 PM
|
Hey, Chops.
Looking at the first photo of the underside, it appears that there are two oil holes in the bulge between the wheels. If so, you should be able to lubricate the gear via those holes.
|
|
Country: USA ~
Posts: 547 ~
Member Since: February 18 2013 ~
Last Visit: April 20 2025
|
Alert Moderator
|
|
|
|
Posted - March 25 2022 : 10:45:18 PM
|
Are my eyes playing tricks on me or does that whole plastic bottom with the side frames, etc. snap on and off at the ends?
Carpe Manana!
|
|
Country: USA ~
Posts: 2405 ~
Member Since: September 17 2013 ~
Last Visit: April 21 2025
|
Alert Moderator
|
|
|
|
Posted - March 26 2022 : 01:47:44 AM
|
Thank you, I will double check those holes; they should line up with the
worms, one would think. And yes, Shags, that is a one piece frame.
|
|
Country: USA ~
Posts: 11501 ~
Member Since: December 09 2013 ~
Last Visit: April 04 2025
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
