|
|
 Posted - October 17 2016 : 8:45:01 PM
|
So, my Tyco E7? On closer inspection, the plastic cover plate for the motor turned out to be missing the brass guides that are supposed to line the brush sockets. I attempted to bodge in some replacements but was only partially successful (the motor runs, but it takes full throttle to get it moving at creep speed) and the process was not kind to the plate.
Does anyone have a spare cover plate they'd be willing to part with? I'd prefer the black version but I'll take what I can get.
Feedback-hungry attention w****
|
Country:  USA ~
Posts: 750 ~
Member Since: December 05 2015 ~
Last Visit: January 24 2024
|
Alert Moderator
|
|
|
|
Posted - October 17 2016 : 10:56:40 PM
|
| picture of part?
|
|
Country: USA ~
Posts: 1110 ~
Member Since: August 19 2011 ~
Last Visit: June 29 2025
|
Alert Moderator
|
|
|
|
Posted - October 18 2016 : 11:12:16 AM
|
This part:
Feedback-hungry attention w****
|
|
Country: USA ~
Posts: 750 ~
Member Since: December 05 2015 ~
Last Visit: January 24 2024
|
Alert Moderator
|
|
|
|
Posted - October 18 2016 : 11:33:23 AM
|
| I JUST MAY have one BUT I can NOT promise excellent condition will let you know hopefully before weeks end
|
|
Country: USA ~
Posts: 1110 ~
Member Since: August 19 2011 ~
Last Visit: June 29 2025
|
Alert Moderator
|
|
|
|
Posted - October 18 2016 : 11:34:33 AM
|
| Also is it the same as an F type You said the engine you have is an E type
|
|
Country: USA ~
Posts: 1110 ~
Member Since: August 19 2011 ~
Last Visit: June 29 2025
|
Alert Moderator
|
|
|
|
Posted - October 18 2016 : 11:56:36 AM
|
That shouldn't be a problem.
Feedback-hungry attention w****
|
|
Country: USA ~
Posts: 750 ~
Member Since: December 05 2015 ~
Last Visit: January 24 2024
|
Alert Moderator
|
|
|
|
Posted - October 18 2016 : 12:08:01 PM
|
WELL MIRICALE OF MIRICLES!!!!!!! started a search and FOUND IT
(Trust me theis is A FLUKE)
Do these help?
|
|
Country: USA ~
Posts: 1110 ~
Member Since: August 19 2011 ~
Last Visit: June 29 2025
|
Alert Moderator
|
|
|
|
Posted - October 18 2016 : 12:44:42 PM
|
It does but it only has one of the brass guides. Still, since I do have one actual one (albeit probably slightly larger) I might be able to make it work
Feedback-hungry attention w****
|
|
Country: USA ~
Posts: 750 ~
Member Since: December 05 2015 ~
Last Visit: January 24 2024
|
Alert Moderator
|
|
|
|
Posted - October 18 2016 : 1:04:09 PM
|
If interested in the one ith th bulb I assume or both three dollars this counts shippng UNLESS you are Alaska or Hawai
Will contact later for moe info Have to go out now
|
|
Country: USA ~
Posts: 1110 ~
Member Since: August 19 2011 ~
Last Visit: June 29 2025
|
Alert Moderator
|
|
|
|
Posted - October 20 2016 : 6:17:43 PM
|
Sorry for late reply. Does the older-style one have both of the brass guides, or is it also missing one?
Feedback-hungry attention w****
|
|
Country: USA ~
Posts: 750 ~
Member Since: December 05 2015 ~
Last Visit: January 24 2024
|
Alert Moderator
|
|
|
|
Posted - October 20 2016 : 8:38:02 PM
|
If you mean the one without the bulb as shown
As I stated I would sell both for quoted price unless you are outside the 48 stetes
|
|
Country: USA ~
Posts: 1110 ~
Member Since: August 19 2011 ~
Last Visit: June 29 2025
|
Alert Moderator
|
|
|
|
Posted - October 20 2016 : 9:50:37 PM
|
Yes, I mean the one without the bulb. What I'm asking about is something I can't tell from the photos, which is whether it has both of the brass brush guides (the flanged brass tubes that go in the brush sockets) I can see for sure that it has one, but the other socket is completely covered by the copper tab
Feedback-hungry attention w****
|
|
Country: USA ~
Posts: 750 ~
Member Since: December 05 2015 ~
Last Visit: January 24 2024
|
Alert Moderator
|
|
|
|
Posted - October 21 2016 : 10:02:33 PM
|
Actually, wait, I'm being stupid about that. The ones on that one would be the same size as the extra I tried to bodge in so it doesn't matter. PM me your e-mail address, I'll take care of paying you as soon as I bank the recycling money
Feedback-hungry attention w****
|
|
Country: USA ~
Posts: 750 ~
Member Since: December 05 2015 ~
Last Visit: January 24 2024
|
Alert Moderator
|
|
|
|
Posted - October 22 2016 : 08:34:33 AM
|
quote: I'll take care of paying you as soon as I bank the recycling money
Originally posted by ZeldaTheSwordsman - October 21 2016 : 10:02:33 PM
|
try doing recycling for about a month! 
I did & got over $600 
|
|
Country: USA ~
Posts: 14911 ~
Member Since: February 23 2009 ~
Last Visit: June 29 2025
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
