|
|
 Posted - April 06 2013 : 12:18:16 PM
|
I have some older cars with metal trucks that I need to change the wheels on. I just can not take the old wheels off. The metal trucks do not spread like the plastic ones. How do you change them? Also, when I change the wheels on the plastic trucks to metal wheels, they are too tight to roll. What do you use to ream the hole some in the trucks?
|
Country:  USA ~
Posts: 338 ~
Member Since: February 08 2013 ~
Last Visit: January 27 2019
|
Alert Moderator
|
|
|
|
Posted - April 06 2013 : 8:24:55 PM
|
| It takes a little doing, you'll get it eventually. You just have to flex BOTH sides enough to pop them out, without spreading them too far. As for reaming the trucks... http://www.micromark.com/ho-truck-tuner,8241.html
|
|
|
|
|
Posted - April 06 2013 : 9:25:43 PM
|
| Thanks Shay, I will give it a try again.
|
|
Country: USA ~
Posts: 338 ~
Member Since: February 08 2013 ~
Last Visit: January 27 2019
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
1 guest.)
