|
|
 Posted - November 11 2012 : 12:00:30 PM
|
First I have a Marxs Critter. I believe, but am not sure, that this is the Plymouth switcher model. It has Kaydee #5 couplers on both the front and rear. When it was last used regularly a few months back it would run well forward and revers. I tested it recently after sitting and found that it is stuttering, may need cleaning. $10 + shipping.
   
Next is a pair of Tyco / Mantua GP 20s with the non PT type drive (original style). The Illinois Centrol Runs well and the light works. It is actually relativly quiet for this type of drive. It should clean up nicely. The Santa Fe will run with allot of cleaning. It needs allot of cosmetic help also. My plan was to take the metal hand rails from the Santa FE and add them to the IC. Also was planning to use the powered truck on the Santa Fe and make the IC dual motored. I currently have to many projects and looking to unload some of them. $15 + shipping.
Conrail F2 shell. Has Glass and Headlight lense. I belive this is made by Model Power. I had used it on an Bachmann Spectrum chassis, it just sat on top without a problem. $5 + Shipping
 
|
Country:  USA ~
Posts: 332 ~
Member Since: August 28 2010 ~
Last Visit: April 23 2020
|
Alert Moderator
|
|
|
|
Posted - November 11 2012 : 12:01:52 PM
|
Yep, thats Marx hustler.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3147 ~
Member Since: May 07 2007 ~
Last Visit: June 01 2026
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
1 guest.)
