I have a number of the Tyco Plymouth industrial switchers and a couple of them are missing the little cardboard insulators that go on the truck covers. Does anyone know where I can get or how i can make replacements?
Any help is appreciated. Thanks. Ray B
Country: USA ~
Posts: 3 ~
Member Since: January 15 2026 ~
Last Visit: January 15 2026
I (disclaimer: I've never done this ) would cut little pieces of paper ( note paper,newspaper ) and glue them on to the ends of side truck frame with a water based white glue. You can experiment with different thickness and easily remove any mistakes. Once dry they will insulate well enough. You can color them with a sharpie black pen which will also insulate. Post here how you eventually solve this problem. Good luck! OTTB
P.S. more than you wanted to know: "Will This Tyco Plymouth Switcher From the 60's Run Again?" Edited by - offtrackthoroughbred on January 16 2026 7:58:03 PM
Country: USA ~
Posts: 169 ~
Member Since: November 26 2009 ~
Last Visit: January 16 2026
Home
Forums
Events Calendar
Forum Admins & Mods
FAQ
Register
Posted - January 15 2026 : 2:59:40 PM
USA ~
Posts: 
