Getting back into hobby after almost 40 years. Have all of my original Tyco trains and have been picking up some stuff off of Facebook Marketplace. In a box I got off of Facebook Marketplace, I got a Clementine Gold Mine and car. I guess this had been in an attic at one time and the Rubber Conveyor Belt was hard as a rock and broke apart. Does anybody know of a replacement for this? I have tried searching but can not find anything. Found some articles that looked promising, but the link did not work.
Thank you
Country: USA ~
Posts: 4 ~
Member Since: July 05 2024 ~
Last Visit: July 11 2024
Here is what found from another site. Hope it helps.
1) Okay, so tonight I measured my Clementine Conveyor, and here are the results: Distance between belt's teeth = less than 1/2 inch Height of conveyor support (minus support base) = about 1 & 1/2 inches
2) I've been told a Lionel 397 coal loader belt will do. Requires a little work but can be done.
welcome to the group I have a 2nd one of those Gold mine loaders & its even missing the belt but I have one intact I just need more of those gold beads
Country: USA ~
Posts: 14906 ~
Member Since: February 23 2009 ~
Last Visit: June 14 2025
Well, I'm not a new member, I was here before as badman55. I closed out the original email account long ago and was unable to transfer the account to the new one.
Country: USA ~
Posts: 16 ~
Member Since: July 18 2024 ~
Last Visit: August 14 2024
Home
Forums
Events Calendar
Forum Admins & Mods
FAQ
Register
Posted - July 05 2024 : 09:10:37 AM
USA ~
Posts: 
