|
Posted - October 19 2017 : 12:02:28 PM
|
Got this Bachmann unit of ebay for $2.64. Reconnected a loose wire and it runs, rear pick up wheels badly grimed, cleaned them up, but I believe the brass pick up strip on the interior rear wheels is equally grimed, as it picks up poorly. The Pancake Motor seems to work well enough. Lightly touched the bearings with trace of oil. How can I improved the pick-up?
|
Country: USA ~
Posts: 11193 ~
Member Since: December 09 2013 ~
Last Visit: April 21 2024
|
Alert Moderator
|
|
|
Posted - October 19 2017 : 12:08:52 PM
|
Pull the wheels and bend the strips out some.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
Posted - October 19 2017 : 12:41:37 PM
|
Will try that, thanks.
|
Country: USA ~
Posts: 11193 ~
Member Since: December 09 2013 ~
Last Visit: April 21 2024
|
Alert Moderator
|
|
|
Posted - October 19 2017 : 2:42:55 PM
|
If the brass pick up strips are anything like those on the Gilbert HO steam locos, I use ultra fine sandpaper to remove the years of grime. Good luck.
|
Country: USA ~
Posts: 510 ~
Member Since: February 18 2013 ~
Last Visit: April 07 2024
|
Alert Moderator
|
|
|
Posted - October 19 2017 : 3:48:24 PM
|
Ah, I will try that. Thanks.
|
Country: USA ~
Posts: 11193 ~
Member Since: December 09 2013 ~
Last Visit: April 21 2024
|
Alert Moderator
|
|