|
Posted - December 03 2019 : 4:56:09 PM
|
I am looking for a source for the 2-56 rivet nuts that people use to remove the trucks with plastic pins and replace them with screw on trucks. I remember this idea from a post way back around 2014. I have used these rivet nuts and they work great ! The original poster indicated they were hard to find in 2-56 but he found some on eBay. Well, that seller no longer exists. Anyone know where I can get them?
Here is the original thread discussing this cool modification
http://www.tycoforums.com/tyco/forum/topic.asp?TOPIC_ID=15163
Edited by - kirkifer on December 03 2019 4:59:49 PM
|
Country: USA ~
Posts: 1 ~
Member Since: December 03 2019 ~
Last Visit: March 29 2024
|
Alert Moderator
|
|
|
Posted - December 05 2019 : 09:26:56 AM
|
I bought a batch back then and they worked great. Ran out about a year ago and have been searching for them ever since with no luck.
|
Country: USA ~
Posts: 101 ~
Member Since: June 26 2019 ~
Last Visit: April 19 2024
|
Alert Moderator
|
|
|
Posted - December 08 2019 : 02:55:59 AM
|
Look for blind nuts. The official term.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|