|
|
 Posted - October 30 2016 : 3:59:12 PM
|
Post 103
Ken Kidder HOn3 engine. My first brass HOn3 engine.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:34:50 AM
|
Country:  USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - October 30 2016 : 4:00:14 PM
|
Ken Kidder 2-4-2T convertible.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:33:39 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - October 30 2016 : 4:00:47 PM
|
Westside Models CA4 caboose.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:35:10 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - October 30 2016 : 9:49:46 PM
|
That 2-4-2T looks like a pretty neat little engine. It'd be fun to tinker and test and see how well it runs and holds the track.
Have you had a chance to run it?
Carpe Manana!
|
|
Country: USA ~
Posts: 2353 ~
Member Since: September 17 2013 ~
Last Visit: April 20 2024
|
Alert Moderator
|
|
|
|
Posted - October 31 2016 : 02:03:12 AM
|
Not yet. Hadn't been home to get it yet.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 02 2016 : 8:18:35 PM
|
Just won this tonight. Couldn't pass it up!
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:42:47 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 02 2016 : 8:42:30 PM
|
do this railbus count?
was $25 at train show 
|
|
Country: USA ~
Posts: 14689 ~
Member Since: February 23 2009 ~
Last Visit: April 19 2024
|
Alert Moderator
|
|
|
|
Posted - November 03 2016 : 08:03:51 AM
|
Post 110
nice howell day/red ball/kmt railbus ben,wish i had been there would have snapped his had off,ken
catfordken
if you cannot see the light at the end of the tunnel,try turning around
Edited by - toptrain on July 05 2017 11:23:24 AM
|
Country:  United Kingdom ~
Posts: 8294 ~
Member Since: September 28 2006 ~
Last Visit: October 20 2021
|
Alert Moderator
|
|
|
|
Posted - November 03 2016 : 09:20:25 AM
|
Ken I don't know how you do, it but you can. I thought that a photo like that didn't exist. Thanks for first finding it, then sharing it.
frank
toptrain
" It's a Heck of a Day " !!!
Edited by - toptrain on November 03 2016 09:21:29 AM
|
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
|
Posted - November 04 2016 : 10:04:45 AM
|
no problems frank,i like a challenge,ken
catfordken
if you cannot see the light at the end of the tunnel,try turning around
|
|
Country: United Kingdom ~
Posts: 8294 ~
Member Since: September 28 2006 ~
Last Visit: October 20 2021
|
Alert Moderator
|
|
|
|
Posted - November 06 2016 : 9:19:34 PM
|
Flying Zoo HOn3.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:49:52 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 07 2016 : 07:35:36 AM
|
nice model justin,sugiyama makes them ,i only have one hon3 model a roundhouse one,running on blackstone pro-trax track,ken
hon3 track is one in the middle,and before someone says why is it posted in brass section,the mogul is a mantua brass one lol
catfordken
if you cannot see the light at the end of the tunnel,try turning around
Edited by - catfordken on November 09 2016 12:02:40 PM
|
|
Country: United Kingdom ~
Posts: 8294 ~
Member Since: September 28 2006 ~
Last Visit: October 20 2021
|
Alert Moderator
|
|
|
|
Posted - November 07 2016 : 12:37:40 PM
|
** Well Ken you have become a worldly man. Not only do you have trains of 3 gauges but know what their track looks like. I don't. Webley has been E-mailing me about the PGW site. Of course with the latest site info, and also help when using the site for sales. So I went to the site. I tried to edit and addition to the last text. I couldn't make it accept the addition so I left the site, and my text which took me some time to form, got lost. Well maybe someday I'll try again.
* I was checking out all the post on this thread and found out I haven't added anything on the last 2 pages. I got a lot of brass so I guess I post a few again. I'll keep it to steam.
* This weekend is a good train show out in Allentown PA, at the fair grounds. The" First Frost Train Show". I'm going on Saturday. If you go Sunday you miss what got sold on Saturday. Well maybe I'll find that clean 500 dollar brass loco for 50 dollars. I know Fat chance! It takes an hour just to walk through all the aisles just glancing to what is there. I'll just be looking for what I don't have in Marx and Gilbert. If I go one way , when I get to the last isle all the interesting stuff is there. If I start and go the other way, the same thing happens. That is way I am the worst poker player in the world.
* Well C U latter. Frank
*
toptrain
" It's a Heck of a Day " !!!
Edited by - toptrain on November 07 2016 12:40:23 PM
|
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
|
Posted - November 08 2016 : 08:26:44 AM
|
Post 116
Here is a locomotive I have posted in the past. It is one of the first brass engines I had gotten. Sold by the HO Train Co. HOTCO. A 1950 locomotive most likely made by Akane for it is in their catalog also. It still runs great. It is a rare bird in that it was built to represent a locomotive that has been run for years and repairs made to it. The sanding pipes which were originally installed inside the body sheeting when they went bad were just replaced by abandoning the bad ones and replacing the piping on top of the sheeting. I also got one of the second release of this loco type by HOTCO where the loco looks new.
The PRR J1sa.
frank
toptrain
" It's a Heck of a Day " !!!
Edited by - toptrain on July 05 2017 11:27:42 AM
|
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
|
Posted - November 20 2016 : 5:23:28 PM
|
Won this Gem today. C16 class I believe. B&O converted some to tank engines. Number 97-99. I'll get this one repainted some day and a few details added.
[URL=http://s1228..com/user/jdboomer904/media/Mobile%20Uploads/_3-51_zps4ompqra9.jpg.html]  [/URL]
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:30:50 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 20 2016 : 7:40:53 PM
|
nice gem c16a justin,but i love that beast that frank posted,ken
catfordken
if you cannot see the light at the end of the tunnel,try turning around
|
|
Country: United Kingdom ~
Posts: 8294 ~
Member Since: September 28 2006 ~
Last Visit: October 20 2021
|
Alert Moderator
|
|
|
|
Posted - December 04 2016 : 01:35:11 AM
|
Won a PFM 2 truck Climax.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:40:09 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - February 13 2017 : 05:03:55 AM
|
Post 120
Bought this Aristocraft at a flea market for $40 Saturday with Jerry from Virginia. It's been highly modified.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:38:28 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - March 12 2017 : 5:52:40 PM
|
[URL=http://s1070.pht.com/user/traintrucker1/media/Screenshot_20170312-142022_zpsx5nfn3ew.png.html]  [/URL]
PFM ATSF 2-8-4
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:25:16 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - March 12 2017 : 6:42:39 PM
|
I think someday I want a 2-8-0 loco with a Vanderbuilt Tender on it
I want to replicate the UP loco #423 which is on display in Gering, NE
oh there is LOTS of them 2-8-0s around here on display
My understanding was #423 was assigned in the yards at Gering, it was sent to scrap yard in the 1950s I think
& the city campaigned to get it back & put on display 
|
|
Country: USA ~
Posts: 14689 ~
Member Since: February 23 2009 ~
Last Visit: April 19 2024
|
Alert Moderator
|
|
|
|
Posted - April 15 2017 : 07:23:42 AM
|
post 123
Well back a month or so I got lucky at a train show and found a Akane "MA and PA" 2-8-0. I haven't touched it yet. Still don't even know if it runs.
frank
toptrain
" It's a Heck of a Day " !!!
Edited by - toptrain on July 05 2017 11:42:42 AM
|
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
|
Posted - April 15 2017 : 07:26:32 AM
|
post 124
At timonium Maryland I found this United ATSF 2-8-0, a pre 1960 model.
frank
toptrain
" It's a Heck of a Day " !!!
Edited by - toptrain on September 21 2017 08:45:52 AM
|
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
|
Posted - April 22 2017 : 11:48:58 PM
|
[URL=http://s1070.t.com/user/traintrucker1/media/20170422_221702_zpsjhhwxhsl.png.html]  http://s1070.pket.com/albums/u489/traintrucker1/20170422_221732_zpsnlfnfujv.png" border="0" style='cursor:default' onload='resizeImage(this);' onClick='doimage(this,event)'> [/URL]
PFM United GS4. Nice scores Frank! Like to get a PFM United ATSF 2-8-0 someday.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:24:21 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - April 24 2017 : 10:30:17 AM
|
Post 126
[URL=http://s1070./user/traintrucker1/media/_3-4_zpsbeguzzam.jpg.html]  [/URL]
A Westside Models Pennsy K5 #5598. The prototype was built in Altoona and the sister, 5599, by Baldwin. Only 2 were built.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:23:29 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - July 05 2017 : 7:01:04 PM
|
[URL=http://s1070./user/traintrucker1/media/20170530_121429_zps4gktmkol.jpg.html]  [/URL]
Balboa Slim Gauge Princess HOn3 car.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:22:34 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - July 05 2017 : 7:07:41 PM
|
Balboa C&S #74 2-8-0 in HOn3.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:21:50 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - July 06 2017 : 8:33:18 PM
|
Post 129
Ken Kidder 2-6-0 in HOn3.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:20:17 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - July 24 2017 : 12:38:01 PM
|
Hi Justin. A copy of the PM I sent you to tell you what happened.
It seems that you did 22 posts in a row in the thread Brass locomotives. Not one of your photos posted. That is a lot of nothing in a row. I would say your choice of location to post your photos is a bad one. I use Flickr because they give you a gig of space.
I will post this to the thread " Brass Locomotives". I don't want to do something that isn't out in the open.
* Once you correct the missing photo thing I edit this and remove the text add another photo to brass locomotives.
frank
Justin In the 22 posts there are 26 photos missing.
toptrain
" It's a Heck of a Day " !!!
Edited by - toptrain on July 24 2017 1:12:40 PM
|
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
|
Posted - July 24 2017 : 12:41:50 PM
|
quote:Hi Justin. A copy of the PM I sent you to tell you what happened.
It seems that you did 5 posts in a row in the thread Brass locomotives. Not one of your photos posted. That is a lot of nothing in a row. I would say your choice of location to post your photos is a bad one. I use Flickr because they give you a gig of space.
I will post this to the thread " Brass Locomotives". I don't want to do something that isn't out in the open.
* Once you correct the missing photo thing I edit this and remove the text add another photo to brass locomotives.
frank
Originally posted by toptrain - July 24 2017 : 12:38:01 PM
|
yeah Photobucket has been screwing everyone on the net as of late!
Do not know why they would do that!
All my pix are transfered off my cam onto them SD Cards, then they are edited, pic shank to size THEN I load them up anywhere!
|
|
Country: USA ~
Posts: 14689 ~
Member Since: February 23 2009 ~
Last Visit: April 19 2024
|
Alert Moderator
|
|
|
|
Posted - July 24 2017 : 2:42:58 PM
|
post 132
** This is a Red Ball CNJ 4-6-0 camelback L6s / T-38 steam locomotive.
frank
toptrain
" It's a Heck of a Day " !!!
Edited by - toptrain on July 24 2017 2:59:04 PM
|
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:03:28 AM
|
Alco Models B1 class box cab electric. Pennsylvania Railroad. Sweet runner.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:08:07 AM
|
Westside Model Co Union Pacific 4-10-2. Not my photo. UP tried these outand ran them on The Overland Route hence the name Overland. Originally 8800-8808. Later on, due to maintenance headaches, the middle or third cylinder was removed, converted to oil and renumberes the FTT class. Oddly, the third cylinder was impressive and they order the 9000 class 4-12-2 with them. Efficient and allowed high speeds.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:10:09 AM
|
post 135
Westside Model Co Pennsylvania Railroad K5 4-6-2. A failed attempt to replace the K4. Tractive effort wasn't too hot. Only 2 were built.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on September 21 2017 08:46:31 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:12:06 AM
|
Westside Model Co UP CA4 caboose painted as a CA8 class. I added window glazing to the model.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:13:38 AM
|
Balboa C&S #74. HOn3.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:15:04 AM
|
PFM SP GS4.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:16:13 AM
|
Ken Kidder HOn3 2-6-0.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:18:17 AM
|
Hope it's ok to leave HO! My Key Imports N scale 3985 UP Challenger.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 13 2017 : 02:33:30 AM
|
I switched over to imgur. Will eventually get all my brass photos and such over on it. Some of these submissions are repeats. Except the 4-10-2, B1 and 3985.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - September 21 2017 : 11:31:09 AM
|
post 142
quote:post 43
Mantua custom built brass 2-6-6-2 Logging Steam Locomotive
Originally posted by Mustangs_n_Trains - August 29 2016 : 5:29:29 PM
|
Never seen any model with a hinged smoke box door. Pray tell, what is that huge pipe
descending from the steam dome??
Edited by - toptrain on December 17 2017 04:57:03 AM
|
|
Country: USA ~
Posts: 11193 ~
Member Since: December 09 2013 ~
Last Visit: April 19 2024
|
Alert Moderator
|
|
|
|
Posted - September 21 2017 : 2:18:43 PM
|
I'd like to find a 2-8-0 with a Vanderbuilt Tender
& a 0-4-0T Saddle tank loco 
|
|
Country: USA ~
Posts: 14689 ~
Member Since: February 23 2009 ~
Last Visit: April 19 2024
|
Alert Moderator
|
|
|
|
Posted - October 09 2017 : 10:03:49 PM
|
LMB NYC L4B class Mohawk 4-8-2
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 11 2017 : 7:23:18 PM
|
Gem Olympia Pennsylvania Railroad H10 class 2-8-0.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 11 2017 : 7:24:56 PM
|
PFM HON3 C&S 2-6-0.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 11 2017 : 7:26:26 PM
|
PFM HON3 Benson 25T Shay
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 18 2017 : 12:55:40 AM
|
Bending the rules a little. A Westside Model Co HOn3 D&RGW Long Caboose.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 24 2017 : 06:30:34 AM
|
post 149
A PFM Hi Grade D&RGW HOn3 K27 2-8-2. Has boiler back detail and a can motor. The other non Hi Grade runs lacked both.
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
Edited by - toptrain on December 17 2017 05:00:31 AM
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
|
|
Posted - November 24 2017 : 07:22:33 AM
|
NICE brass steamer addition, Justin! By the way, I love the brass Shay above ^^ 
"Let your light so shine before men, that they may see your good works, and glorify your Father which is in Heaven." - Matthew 5:16
Youtube Channel: www.youtube.com/rpmodelrailroads
Instagram: https://www.instagram.com/rp_model_railroads/
|
|
Country: USA ~
Posts: 4669 ~
Member Since: August 11 2017 ~
Last Visit: July 20 2023
|
Alert Moderator
|
|
|
|
Posted - December 04 2017 : 10:18:58 AM
|
post 151
One of the last brass engines I acquired is a Tenshodo New York Central Mohawk 4-8-2. I have not had the time to get it running yet. I have a 6 car set of Bachmann Spectrum passengers to put behind it. It should look pretty good when it gets to rolling around my Layout.
frank
toptrain
" It's a Heck of a Day " !!!
Edited by - toptrain on December 17 2017 05:04:21 AM
|
|
Country: USA ~
Posts: 7504 ~
Member Since: August 07 2008 ~
Last Visit: February 24 2024
|
Alert Moderator
|
|
|
|
Posted - December 16 2017 : 5:38:00 PM
|
Howell Day Pennsylvania Railroad class B6sb 0-6-0
" Heck with counting 'em rivets, TRAINS ARE FOR FUN! Not called the Mad Scientist for nothing either!"
|
|
Country: USA ~
Posts: 3145 ~
Member Since: May 07 2007 ~
Last Visit: April 04 2024
|
Alert Moderator
|
|
Home
Forums
Events Calendar
Forum Admins & Mods
Register
