|
Posted - May 12 2015 : 9:38:52 PM
|
tyco brushings and springs???
Tuesday, May 12, 2015
Hello every one, Just one quick queston. Where can I get some brushings n springs that will work in the old tyco engines? Thanks in advance.
|
Country: USA ~
Posts: 3 ~
Member Since: May 12 2015 ~
Last Visit: May 12 2015
|
Alert Moderator
|
|
|
Posted - May 12 2015 : 9:42:57 PM
|
http://www.tycoforums.com/tyco/forum/topic.asp?TOPIC_ID=15543&SearchTerms=brushes
I posted on this some time ago. Basically, the old T-Jet / Aurora brushes were flat. the Ebay link in that Search post above still works. Those will work in the PT motor. You didn't say if you were looking for MU-2 motor brushes ( don't have a source for those myself ).
Jerry
" When life throws you bananas...it's easy to slip up"
|
Country: USA ~
Posts: 3974 ~
Member Since: January 04 2009 ~
Last Visit: January 11 2019
|
Alert Moderator
|
|
|
Posted - May 12 2015 : 10:09:08 PM
|
thanks for the info,,,, I will check it out
|
Country: USA ~
Posts: 3 ~
Member Since: May 12 2015 ~
Last Visit: May 12 2015
|
Alert Moderator
|
|
|
Posted - May 12 2015 : 10:09:53 PM
|
thanks for the info,,,, I will check it out
|
Country: USA ~
Posts: 3 ~
Member Since: May 12 2015 ~
Last Visit: May 12 2015
|
Alert Moderator
|
|