Tyco Collector's Forum -

Welcome to the forum.

[ Active Members: 0 | Anonymous Members: 0 | Guests: 12 ] [ Total: 12 ] [ Newest Member: Rohan4301 ]

Select Skin:

All Forums

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

UserName:

Password:

Format Mode:

Format:

Callouts:

Message Icon:

Message:

Smilies

* HTML is OFF | * Forum Code is ON

Check here to include your profile signature.

T O P I C R E V I E W
AndyTrain	Posted - July 21 2022 : 10:13:42 PM
	I recently purchased a Tyco Blue and Gray Centennial set and this was included. It looks like a horn mounted on a rubber donut and don't believe it belongs in this set. Any clue what this is?
5 L A T E S T R E P L I E S (Newest First)
AndyTrain	Posted - August 07 2022 : 11:46:45 AM
	Have no use for its ScaleCraft, I only collect Tyco, if you need it let me know
ScaleCraft	Posted - July 22 2022 : 6:50:21 PM
	Size looks like my Lionel 2343 horns. Save it!
AndyTrain	Posted - July 22 2022 : 5:48:10 PM
	Thanks for the info and the reply! The width of the donut is approximately 7/8 of an inch and the horn itself is half an inch long.
AndyTrain	Posted - July 22 2022 : 5:08:00 PM
	Thanks for the reply and the information. Here are the dimensions.
ScaleCraft	Posted - July 22 2022 : 3:58:26 PM
	You don't give dimensions, but it appears to be an 0 Lionel 3-rail F unit roof mounted horn. They were just like that, turned horn, inserted into a blackened "L" shaped frame, peened over at the rear of the horn, with two tabs hanging down (like yours) bent over to retain in place. Almost looks like a hogged out old toy rubber tire it's stuck in. Length of horn?

This page was generated in 0.06 seconds.